The TrewTungsten® Collection
Please see the ordering info below.
TTXP™Solid Beveled Edge TrewTungsten® with Textured Platinum (PVD) Finish |
||
|---|---|---|
5mm (style #5MTTXP) |
7mm (style #7MTTXP) |
9mm (style #9MTTXP) |
Trew24™Solid TrewTungsten® with 24 Mirrored Facets |
||
|---|---|---|
5mm (style #5MT24) |
7mm (style #7MT24) |
9mm (style #9MT24) |
TrewEdge™Solid TrewTungsten® Original Beveled Edge |
||
|---|---|---|
5mm (style #5MTT) |
7mm (style #7MTT) |
9mm (style #9MTT) |
TrewEdge™Original Beveled Edge inlaid with Brushed 18k Yellow Gold |
||
|---|---|---|
5mm (style #5M18YF) |
7mm (style #7M18YF) |
9mm (style #9M18YF) |
TrewEdge™Original Beveled Edge inlaid with Concave Polished 18k Yellow Gold |
||
|---|---|---|
5mm (style #5M18YC) |
7mm (style #7M18YC) |
9mm (style #9M18YC) |
TrewEdge™Original Beveled Edge inlaid with Brushed 18k Bronze Gold |
||
|---|---|---|
5mm (style #5M18BF) |
7mm (style #7M18BF) |
9mm (style #9M18BF) |
TrewEdge™Original Beveled Edge inlaid with Concave Polished 18k Bronze Gold |
||
|---|---|---|
5mm (style #5M18BC) |
7mm (style #7M18BC) |
9mm (style #9M18BC) |
TrewEdge™Original Beveled Edge inlaid with Platinum |
||
|---|---|---|
5mm (style #5MPT) |
7mm (style #7MPT) |
9mm (style #9MPT) |
TrewEdge™Original Beveled Edge inlaid with Hammered 22k Yellow Gold |
||
|---|---|---|
5mm (style #5M22H) |
7mm (style #7M22H) |
9mm (style #9M22H) |
Center LineSolid TrewTungsten® |
||
|---|---|---|
5mm (style #5MCL) |
7mm (style #7MCL) |
9mm (style #9MCL) |
Flat TopSolid TrewTungsten® |
||
|---|---|---|
5mm (style #5MFT) |
7mm (style #7MFT) |
9mm (style #9MFT) |
Low Dome TrewTungsten®Inlaid with Brushed 18k Yellow Gold |
||
|---|---|---|
5mm (style #5M18YLD) |
7mm (style #7M18YLD) |
9mm (style #9M18YLD) |
Narrow Low Dome TrewTungsten®Inlaid with Brushed 18k Yellow Gold |
|
|---|---|
7mm (style #7M18YNLD) |
9mm (style #9M18YNLD) |
Low Dome TrewTungsten®Inlaid with Brushed 18k Bronze Gold |
||
|---|---|---|
5mm (style #5M18BLD) |
7mm (style #7M18BLD) |
9mm (style #9M18BLD) |
Narrow Low Dome TrewTungsten®Inlaid with Brushed 18k Bronze Gold |
|
|---|---|
7mm (style #7M18BNLD) |
9mm (style #9M18BNLD) |
Low Dome TrewTungsten®Inlaid with Hammered 22k Yellow Gold |
||
|---|---|---|
5mm (style #5M22HLD) |
7mm (style #7M22HLD) |
9mm (style #9M22HLD) |
Narrow Low Dome TrewTungsten®Inlaid with Hammered 22k Yellow Gold |
|
|---|---|
7mm (style #7M22HNLD) |
9mm (style #9M22HNLD) |
Low Dome TrewTungsten®Inlaid with Platinum |
||
|---|---|---|
5mm (style #5MPTLD) |
7mm (style #7MPTLD) |
9mm (style #9MPTLD) |
Narrow Low Dome TrewTungsten®Inlaid with Platinum |
|
|---|---|
7mm (style #7MPTNLD) |
9mm (style #9MPTNLD) |
Ordering Information
- Sizing; Please make sure to have your finger measured with standard narrow finger sizers only, regardless of band width you choose. As a helpful tip, you may consider that most people's fingers vary a half of a size from morning till night. Traveling frequently causes swelling and will make your band fit more snug than usual.
- TrewTungsten® bands are normally available in full and half sizes from 3 to 12½ (no quarter sizes) and are available in 5, 7 and 9 millimeter widths.
- Special oversize bands from 13 to 15½ are available in 7 and 9 millimeter widths only for an additional charge of 25%, (not available in diamond set or concave polished versions)
- Each non pre-engraved ring comes with a 7-day size guarantee and can be returned in like new condition and exchanged for another size of the same design at the discretion of Trent West Design.
- TrewTungsten® bands are not sizable. Trent West Design offers a new, equal or similar ring in the new desired size at no additional cost. To qualify, the original owner must present their ring in a non damaged condition along with a copy of the original invoice and warranty form to an authorized retailer. Allow 4 weeks for your replacement. Limit one size exchange per original customer.
- Please allow three to four weeks plus shipping time for non-diamond set band orders.
Services Offered
- Custom laser engraving is available. Please provide written instructions and make certain that the size is correct when ordering engraving because a new band will need to be made and re-engraved. Engraving removal fees are associated with the returned band.
- TrewTungsten® hard metal surface portions of the band with minor scratches may be re-polished for no charge at the discretion of Trent West Design.
Notes
- About custom engraving: Trent West Inc. will not pre-engrave diamond set, oversized, or concave bands before the consumer approves of the size on their hand. Please return to the nearest authorized TrewTungsten® retailer for laser engraving after you have approved the band's size first.
- Caution: The factory will void the warranty if a band is abused or altered in any way, including unauthorized engraving, stretching, sizing, drilling, stone setting, polishing, ultrasonic cleaning, boiling in caustic solutions etc. or signs of obvious repeated physical abuse.
- Prices are not available on this web site. Please see your local authorized retailer.





















































